How to cut a golf shaft?



How to cut a golf shaft?

Slowly and smoothly, cut all the way through the shaft. Try to cut it all the way through in one motion, otherwise you may get an uneven cut. Turn off the saw and unplug it before removing the club. Use sandpaper to smooth the rough edges of the butt end of the club. Put a new grip on the end of the shaft to finish the job.

How to cut a golf club to size?

Cut off the grip. With a utility knife, carefully make a cut along the grip. Remove the grip and dispose of it in the garbage. Remove the tape. Underneath the grip, you will find tape. Remove this by peeling it off. Measure the desired new length of club. With the measuring tape, measure the desired length to be cut off.

How do you fix a loose grip on a golf club?

To do that, the DIY golfer will have to: Remove the existing grip. With steel shafts, use a tubing cutter to trim the shaft; with graphite shafts, shorten using a hacksaw. Re-install a grip on the newly shortened shaft. And, most importantly, Wishon says, add weight to the clubhead in some manner to restore the swingweight feel of the club.

How to shorten a golf club?

How to Shorten Golf Clubs 1 Insert the golf club into a shaft clamp and tighten the clamp to keep the club from moving around while you work on the grip. 2 Use a utility knife to cut the side of the existing grip. Pull off the grip and discard it. … 3 Wrap masking tape around the area of the shaft that will be cut. … More items…